SDA-4600

4-channel Bridgeable Class D Amplifier

The SDA-4600 is a versatile 4-channel Class D power amplifier designed to deliver maximum power while taking up minimal rack space. Each channel is rated to deliver 600W into 8 ohms and adjacent channel pairs can be bridged to deliver 1,200W into 8 ohms. This flexible channel configuration makes this an ideal amplifier to power larger LCRs and subwoofers in JBL Synthesis immersive audio systems. Powerful built-in DSP allows for custom loudspeaker tuning and full external control allows for complete and easy system integration.

600WPC into 8 ohms, 1,200W into 8 ohms Bridged Channel Pairs

600WPC into 8 ohms, 1,200W into 8 ohms Bridged Channel Pairs

Balanced and Unbalanced Analog Inputs via Phoenix Terminal Block Connectors

Balanced and Unbalanced Analog Inputs via Phoenix Terminal Block Connectors

BLU-Link Digital Audio Networking

BLU-Link Digital Audio Networking

Barrier Strip Speaker Terminals

Barrier Strip Speaker Terminals

High-efficiency Internal Cooling Fans

High-efficiency Internal Cooling Fans

Advanced Digital Signal Processing with Limiters, Delays, and Additional Control

Advanced Digital Signal Processing with Limiters, Delays, and Additional Control

Specifications

General Specifications

Cooling Continuously variable speed forced air, front to back airflow
Maximum Fan Noise (dBA SPL @ 1M) 45
Required AC Mains (±10%) 100Vrms - 240Vrms ~50/60Hz

Audio Specifications

Rated Output Power Into 8 Ohms 600W
Rated Output Power Into 4 Ohms 600W
Rated Output Power Into 2 Ohms 300W
Bridged Output Power Into 8 Ohms 1200W
High Impedance 70-Volt & 100-Volt Capable
Frequency Response (8Ω, 20Hz - 20kHz) ±0.25dB
Analog Input Signal to Noise Ratio 104 dB
BLU link Input Signal to Noise Ratio (A-Weighted) >108dB
Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) 0.35%
Damping Factor (20Hz to100Hz) >1000
Input Impedance (nominal balanced, unbalanced) 10kΩ, 5kΩ
Maximum Input Level before Compression (Low Gain Mode); (+)20dB Yes
Load Impedance Stereo/Dual Mode 2Ω - 16Ω; 70Vrms and 100Vrms
Load Impedance Bridge Mono 4Ω - 16Ω; 140Vrms and 200Vrms

Dimensions

Width 19 in. (48.3 cm)
Height 3.5 in. (8.9 cm)
Depth 14.25 in. ( 35.63 cm)
Weight 20.1lbs (9.12kg)

Control and Connection Specifications

Four balanced line inputs 6-pin block connectors (Two channels per block connector)
Four speaker level outputs Terminal strip (accepts up to 10AWG wire)
BLU link Input/Output RJ-45 (Category 5e)
Ethernet RJ-45 (Category 5e)
Programmable General Purpose Input/Output Ports 3-pin block connector (Enables SLEEP mode and monitoring of AMP STATUS)
Power Connector 15A IEC
  • SDA-4600 - Black - 4-channel Bridgeable Class D Amplifier - Hero
  • SDA-4600 - Black - 4-channel Bridgeable Class D Amplifier - Back
  • SDA-4600 - Black - 4-channel Bridgeable Class D Amplifier - Detailshot 1
  • SDA-4600 - Black - 4-channel Bridgeable Class D Amplifier - Detailshot 2
  • SDA-4600 - Black - 4-channel Bridgeable Class D Amplifier - Detailshot 3
  • SDA-4600 - Black - 4-channel Bridgeable Class D Amplifier - Detailshot 4
  • SDA-4600 - Black - 4-channel Bridgeable Class D Amplifier - Detailshot 5
Find a JBL Synthesis Dealer

Find a JBL Synthesis Dealer

Find an authorized dealer or installer to get started