Immersive High Resolution Sound: 16 Channels of discrete high resolution processing with 4 user configurable channels enable a plethora of set up options for Dolby Atmos, DTS:X3D, Auro 3D Immersive Surround Sound Applications.
Dante Network Audio: All 16 channels of processed audio, plus Zone 2 can be routed on a single CAT5e, CAT6 cable over a standard network. Dante is easy to set up and compatible with Dante enabled JBL Synthesis amplifiers.
IMAX Enhanced: IMAX Enhanced-certified AV receiver and features DTS:X immersive audio decoding that is optimized to properly reproduce the full dynamic range of IMAX theatrical sound mixes available in IMAX Enhanced content.
Network and Bluetooth Streaming: Control your favorite content over Ethernet or Wi-Fi, via Chromecast built-in, Apple AirPlay 2, Roon, the Harman Luxury MusicLife app, play directly from a USB flash drive, or stream via Bluetooth with aptX HD.
Class G Amplification: Like a hybrid car engine, Class G implements multiple power supplies. The first power supply runs in pure Class A, which has no crossover distortion. If a dynamic signal is received that goes beyond the threshold of this first power supply, the secondary supply is gradually incorporated as required.
Cinematic Video Experience: Dolby Vision, HDR10+, HDMI2.0b with HDCP2.2, 4K "Ultra HD" as well as 3D video capabilities are built-in.
Designed for the Integrator: With an available rack mount kit, Dante, eARC and in internal Java-based configuration page, Dirac Live, IP, IR RS232 and iOS and Android App control the install, set up, and calibration has never been easier.
Logic 16: Logic 16 will up-mix any input source from mono up to 15.1, including all Dolby formats with natural astonishing 3D sound. In addition Dolby, DTS Neural:X, and Auro 3D upmixers are on board.
|Continuous power output, per channel: 8Ω/4Ω|
|2 channels driven, 20Hz - 20kHz, <0.02% THD: 120W/200W|
|2 channels driven, 1kHz, 0.2% THD: 140W/220W|
|7 channels driven, 1kHz, 0.2% THD: 100W/180W|
|Residual noise & hum (A-wtd): <0.15mV|
|Maximum input: 4.5V rms|
|Nominal sensitivity: 1V, 2V, 4V (user adjustable)|
|Input impedance: 47kΩ|
|Signal/noise ratio (A-wtd ref 100W) normal/stereo direct: 100dB/110dB|
|Frequency response: 20Hz—20kHz ± 0.1dB|
|Nominal output level: 1V RMS (max. 5V RMS)|
|Output impedance: 560Ω|
|THD+N (20Hz—20kHz): –100dB|
|Headphone Output: Maximum output level into 32Ω: 5Vrms|
|Headphone Output: Output impedance:560Ω: <100Ω|
|Mains voltage: 110–120V or 220–240V, 50–60Hz|
|Power consumption (maximum): 50W (Thermal dissipation approx. 170 BTU/hour)|
|Power consumption (idle, typical): 40W (Thermal dissipation approx. 170 BTU/hour)|
|Power consumption (standby): <0.5W|
|Dimensions W x D (including speaker terminals) x H (including feet): 433 x 425 x 171mm|
|Weight (net): 10.6kg|
|Weight (packed): 13.9kg|
What's in the box?
- Remote Control with 2 X AAA Batteries
- Calibration Mic
- Power Cord
- USB Cable
- DAB/FM Aerial Antennna
- 3 x Wi-Fi/Bluetooth Antennas
Manuals & Downloads
The latest owner's manuals, quick start guides, and documents.
Owners Manual / Quick Start Guide (EN)
Spec Sheet (EN)
RTI Driver 1.2
Control 4 Driver v.114
Crestron Driver v.1.0.0
Elan Driver v.1.0.1
RS232 and IR Commands
Connecting to a Home Network- Instructions
SDR35_SDP55_Dante Channel Routing Instructions v2_11JUN20
Dirac Update Link
Mic Calibration and Target Files
Quick Start Guide (English)