SCL-2 SCL-2 SCL-2 SCL-2

SCL-2

SCL-2

2.5-Way Flush-Mounted Loudspeaker


2.5-Way Flush-Mounted Loudspeaker

Find a Dealer

SCL-2

Part of the JBL Synthesis Custom Loudspeakers range, the SCL-2 offers the highest level of acoustic performance available from a flush-mount loudspeaker. The SCL-2 is designed with a 2.5-way, triple 8-inch (200mm) driver configuration for low-frequency extension with high output capability and powerful dynamics. A D2415K dual voice coil, dual 1.5-inch (38mm) annular ring diaphragm Teonex® compression driver with advanced HDI geometry horn works in conjunction with three powerful cast-frame, 8-inch (200mm) Advanced Aluminum Matrix cone woofers with low distortion motor structures.

The loudspeaker’s 5.5-inch (140mm)-deep enclosure fits standard wall construction applications and features a Sonoglass™ precision molded baffle assembly with integrated HDI waveguide/horn, and a zero-bezel, magnetically-attached grille.The loudspeaker’s enclosure can be oriented with the horn closer to the top or bottom, or on its side for center channel or reduced height applications. SCL-2 systems can be mixed and matched with other SCL speakers or any JBL Synthesis loudspeakers.

Designed to provide ultimate performance and the highest levels of dynamics from any in-wall loudspeaker, the SCL-2 can discretely integrate into any environment and décor. They can also be installed in a traditional application behind acoustic fabric or woven/perforated video screens without installing the grilles. They feature a discrete matte black baffle, HDI waveguide, and transducers, with a paintable white grille. The SCL-2 is the perfect solution for in-wall LCR or surround channel applications as part of JBL Synthesis home theater.

  • Highlight & Specs
  • Manuals & Downloads

SCL-2 Highlights

  • 2½-way, triple 8-inch/200mm driver configuration – ideal for wall mount
  • 5.9-inch/150mm deep, rectangular footprint enclosure
  • Can be mounted vertically or horizontally for maximum application flexibility and performance
  • Computer-optimized HDI Constant Directivity Horn with very smooth and predictable off-axis behavior over a wide coverage area
  • D2415K, 1.5-inch/37.9mm annular ring Teonex® diaphragm compression driver with advanced HDI geometry horn
  • Powerful cast-frame, Advanced Aluminum Matrix cone woofers with low-distortion neodymium motor structures
  • Sonoglass® baffle with integrated HDI waveguide for maximum strength and high internal damping
  • Solid MDF enclosure installs behind drywall and provides optimized acoustic performance and enhanced acoustic isolation from the wall
  • Rubber isolation mounts attach cabinet to wall studs, ensuring a firm yet isolated mounting
  • Bi-Wire and Bi-Amp capable network using gold-plated binding posts on rear enclosure, and an easy Molex® baffle to network connection
  • Zero-bezel, magnetically-attached grille can be painted to match décor

General Specifications

Speaker type 2½-way in-wall loudspeaker
Low frequency transducer Three 8” (200mm) cast-frame, Advanced Aluminum Matrix cone woofers
Mid/High frequency transducer D2415K, 1.5” (38mm), dual annular ring Teonex® diaphragm compression driver mounted to Sonoglass® horn/baffle
445 Watts RMS (CEA-426B specification, calculated onto the SCL-2 rated load impedance)
Frequency response (-6 dB on-axis) 57 Hz – 25 kHz
Coverage area (-6dB@20kHz) 80 x 70 Degrees (Hor x Vert)
Coverage area (-6dB@10kHz) 100 x 100 Degrees (Hor x Vert)
Sensitivity (2.83V@1m) 92dB
Nominal Impedance 6 Ohm
Crossover frequencies 225Hz; 1.3kHz
Enclosure type Sealed in-wall mount with included back box
Inputs Dual gold-plated binding posts
Finished grille dimensions (H x W) 40.2” x 12.8” (1020.8mm x 325.5mm)
Cutout dimensions with backbox (H x W) 38.25” x 11.5” (971.6mm x 292.1mm)
Mounting depth with backbox 5.8” (147mm)
Weight 53.5 lb (24.3 kg)
Finishes Matte Black with white paintable grille

View all In-wall Loudspeakers

Not finding what you're looking for?

View all In-wall Loudspeakers