SCL-3 SCL-3 SCL-3 SCL-3

SCL-3

SCL-3

Two-way In-Wall Loudspeaker


Two-way In-Wall Loudspeaker

Find a Dealer

SCL-3

The JBL brand has become synonymous with the cinema experience. The SCL-3 was designed to continue this legacy. The two-way SCL in-wall loudspeakers are the first flush-mount compression driver loudspeakers using JBL Professional technology. The dual 5-¼" cast frame aluminum woofers are ideal for in-wall or ceiling mounting. Utilizing the D2-derived 1-inch / 25mm annular ring compression driver with Teonex® diaphragm and an advanced HDI geometry horn, the SCL-3 provides unparalleled performance compared to any in-wall loudspeaker in the market today.

  • Highlight & Specs
  • Manuals & Downloads

SCL-3 Highlights

  • Dual 5-¼"” (130mm) cast-frame, advanced aluminum matrix cone woofers with low-distortion neodymium motor structures
  • D2-derived 1" (25mm) 2409H annular ring, Teonex ® diaphragm, compression driver
  • Patented HDI™ (High-Definition Imaging) technology provides elevated performance in combination with patented D2-Series compression driver.
  • Design can be oriented in any of the four possible directions for flexibility in applications as an in-wall surround, in-wall LCR, or in-ceiling overhead height channel
  • Ideal for overhead channel flush-mount for Dolby Atmos or similar Immersive surround sound installations
  • Patent Pending extended range L-Bracket mounting system
  • Zero-bezel, magnetically-attached grille
  • Dual binding post inputs for bi-wire or bi-amplified connections
  • Low resonance, well damped MDF wood rear enclosures
  • Unique center mounting point to aid installation and greatly minimize baffle resonances
  • High-performance passive network utilizing all air core inductors, polypropylene capacitors

General Specifications

Speaker Type Two-way In-Wall Loudspeaker
Low Frequency Transducer Dual 5-¼” (130mm) cast-frame, advanced aluminum matrix cone woofers
Mid/High Frequency Transducer D2-derived 1" (25mm) 2409H annular ring, Teonex® diaphragm compression driver
Maximum Recommended Amplifier Power 200 watts RMS• Frequency Response (-6dB on-axis)
Coverage area (-6dB @ 20 KHz) 90 x 60 deg, (-6dB @ 10 KHz)
Sensitivity (2.83V@1m) 91dB
Nominal Impedance 6 Ohm
Crossover Frequencies 1.3 KHz
Enclosure type Sealed In-Wall Mount with included back box
Inputs Dual Gold-plated Five-way Binding Posts
Dimensions (H x W x D) 16.46" x 16.46" x 6.01" (418mm x 418mm x 153mm)
Weight 24.3 lb (11.02 kg)
Finishes Matte Black

View all In-wall Loudspeakers

Not finding what you're looking for?

View all In-wall Loudspeakers