SCL-7

2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker

The SCL-7 is the smallest traditional in-wall model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a width or surround channel or as an LCR in smaller systems. The SCL-7 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with two 5.25-inch (130 mm) Advanced Aluminum Matrix cone cast-frame woofers into a precision molded baffle assembly. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 45 degrees from the listening position. The SCL-7 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in small to medium rooms.

Patented 2410H-2 1-inch (25mm) Compression Driver

Patented 2410H-2 1-inch (25mm) Compression Driver

Patented High-Definition Imaging Horn Geometry

Patented High-Definition Imaging Horn Geometry

Dual 5.25-inch (130mm) Cast-frame, Advanced Aluminum Matrix Cone Woofers

Dual 5.25-inch (130mm) Cast-frame, Advanced Aluminum Matrix Cone Woofers

Molded Baffle with Patented Cat Claw Installation Mechanism

Molded Baffle with Patented Cat Claw Installation Mechanism

Advanced Crossover Network

Advanced Crossover Network

Gold-plated Spring-loaded Binding Post Input Terminals

Gold-plated Spring-loaded Binding Post Input Terminals

Zero-bezel, Magnetically-attached Paintable Grille

Zero-bezel, Magnetically-attached Paintable Grille

Specifications

General Specifications

Type 2-Way In-wall loudspeaker
Low Frequency Driver Two 5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofers (JW13Al-4)
High Frequency Driver 1" (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver
Recommended Amplifier Power 25 – 150W RMS
Impedance 4 Ohm
Loudspeaker Sensitivity 88 dB/2.83V/1m (2pi anechoic)
Frequency Response 55Hz - 30kHz (-6 dB on-axis), 2pi anechoic
Crossover Frequency 2.0 kHz
High Frequency Coverage Angle (-6 dB) 60° Vertical, 90° Horizontal (Left
Enclosure Type Open back
Controls Boundary Proximity Control
Grille Dimensions 7.32” (186 mm) x 19.15” (486 mm)
Product Dimensions (with grille) 7.32” (186 mm) x 19.15” (486 mm) x 3.88” (99 mm)
Cut-out Dimensions 6.18” (157 mm) x 18.03” (458 mm)
Rough-in Bracket WB52
Mounting Depth 3.64” (93 mm)
Input Type Gold-plated spring-loaded binding posts
Product Weight 12.6 lbs (5.72 kg)
Shipping Weight 14.6 lbs (6.62 kg)
Shipping Units of Measure Each
Warranty 5 Years
  • SCL-7 - Black - 2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker - Hero
  • SCL-7 - Black - 2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker - Front
  • SCL-7 - Black - 2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker - Back
  • SCL-7 - Black - 2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker - Detailshot 1
  • SCL-7 - Black - 2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker - Detailshot 2
  • SCL-7 - Black - 2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker - Detailshot 3
Find a JBL Synthesis Dealer

Find a JBL Synthesis Dealer

Find an authorized dealer or installer to get started