SCL-6 Highlights
-
2.5-way in-wall loudspeaker system designed for on-axis listening as LCR and surround channels
-
1-inch 2410H-2 compression driver tweeter mated to a JBL patented High-Definition Imaging (HDI™) horn precision molded baffle assembly
-
Four 5.25-inch (130mm) Advanced Aluminum Matrix cone cast frame woofers
-
Can be mounted vertically or horizontally
-
Patented Cat Claw installation mechanism
-
Gold plated, spring-loaded binding posts
-
Includes paintable zero-bezel, magnetically attached grilles
General Specifications
Type | 2.5-Way In-wall loudspeaker |
---|---|
Low Frequency Driver | Four 5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofers (JW13Al-4) |
High Frequency Driver | 1" (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver |
Recommended Amplifier Power | 25 – 200W RMS |
Impedance | 4 Ohm |
Loudspeaker Sensitivity | 91 dB/2.83V/1m |
Frequency Response | 50Hz - 30kHz (-6 dB on-axis), 2pi anechoic |
Crossover Frequency | 1.8 kHz |
High Frequency Coverage Angle (-6 dB) | 80° Vertical / 80° Horizontal, from 2 kHz to 17 kHz. |
Enclosure Type | Open back |
Controls | Boundary Proximity Control |
Grille Dimensions | 7.29” (185 mm) x 31.32” (796 mm) |
Product Dimensions (with grille) | 7.29” (185 mm) x 31.32” (796 mm) x 3.82” (97.1 mm) |
Cut-out Dimensions | 5.95” (151 mm) x 29.98” (761 mm) |
Rough-in Bracket | WB54 |
Mounting Depth | 3.63” (92 mm) |
Input Type | Gold-plated spring-loaded binding posts |
Product Weight | 22.2 lbs (10.07 kg) |
Shipping Weight | 25.6 lbs (11.61 kg) |
Shipping Units of Measure | Each |
Warranty | 5 Years |