SCL-7 - Black - 2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker - Hero SCL-7 - Black - 2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker - Front SCL-7 - Black - 2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker - Back SCL-7 - Black - 2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker - Detailshot 1 SCL-7 - Black - 2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker - Detailshot 2 SCL-7 - Black - 2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker - Detailshot 3

SCL-7

JBLSCL7

2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker


The SCL-7 is the smallest in-wall model in the expanded JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for deployment in high-performance immersive audio systems in small to medium size rooms. The SCL-7 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with two 5.25-inch (130 mm) Advanced Aluminum Matrix cone cast-frame woofers into a precision molded baffle assembly. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 45 degrees from the listening position. The SCL-7 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution.

Find a Dealer

SCL-7

The SCL-7 is the smallest in-wall model in the expanded in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for deployment in high-performance immersive audio systems in small to medium size rooms. The SCL-7 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with two 5.25-inch (130mm) Advanced Aluminum Matrix cone cast-frame woofers into a precision molded baffle assembly. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 45 degrees from the listening position. Premium components are used throughout the crossover network including a boundary gain adjustment switch while high-quality gold-plated push type speaker terminals ensure a secure connection. Installation is simple and quick with the new Cat Claw mounting mechanism that allows the speaker to be securely clicked into place freeing up two hands for tightening it down flush and level to the wall. A zero bezel magnetically attached grille is included and can be painted to match any décor. The SCL-6 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution.

  • Highlights & Specs
  • Documents & Downloads

SCL-7 Highlights

  • 2-way in-wall loudspeaker system designed for off-axis listening as LCR and surround channels
  • 1-inch 2410H-2 compression driver tweeter mated to a JBL patented High-Definition Imaging (HDI™) horn precision molded baffle assembly
  • Two 5.25-inch (130mm) Advanced Aluminum Matrix cone cast frame woofers
  • Can be mounted vertically or horizontally
  • Patented Cat Claw installation mechanism
  • Gold plated, spring-loaded binding posts
  • Includes paintable zero-bezel, magnetically attached grilles

General Specifications

Type 2-Way In-wall loudspeaker
Low Frequency Driver Two 5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofers (JW13Al-4)
High Frequency Driver 1" (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver
Recommended Amplifier Power 25 – 150W RMS
Impedance 4 Ohm
Loudspeaker Sensitivity 88 dB/2.83V/1m (2pi anechoic)
Frequency Response 55Hz - 30kHz (-6 dB on-axis), 2pi anechoic
Crossover Frequency 2.0 kHz
High Frequency Coverage Angle (-6 dB) 60° Vertical, 90° Horizontal (Left 30°, Right 60°, from center line), from 2 kHz to 15 kHz
Enclosure Type Open back
Controls Boundary Proximity Control
Grille Dimensions 7.32” (186 mm) x 19.15” (486 mm)
Product Dimensions (with grille) 7.32” (186 mm) x 19.15” (486 mm) x 3.88” (99 mm)
Cut-out Dimensions 6.18” (157 mm) x 18.03” (458 mm)
Rough-in Bracket WB52
Mounting Depth 3.64” (93 mm)
Input Type Gold-plated spring-loaded binding posts
Product Weight 12.6 lbs (5.72 kg)
Shipping Weight 14.6 lbs (6.62 kg)
Shipping Units of Measure Each
Warranty 5 Years

View all In-wall Loudspeakers

View all In-wall Loudspeakers

Not finding what you're looking for?

View all In-wall Loudspeakers